Most approx. photo shown above. Explain | View Larger

The 4000 Series Wiper-Slot rotor has a unique 6x6 slotted design for extreme stopping power on the road and the track. As with every DBA rotor, the 4000 Series rotor bolts right onto the vehicle with no mechanical changes needed.

DBA's mid-series, enhanced-performance, slotted rotor features Thermal Stability Profiling (TSP) for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.

---

---

---

This system provides two key advantages.

First, is the ability to cool the rotor faster than ever before. As the disc rotor rotates, aerodynamic turbulence around the individual pillars and columns is generated, increasing the force of hot air out from within the internal areas of the rotor.

Second is increased dimensional stability across the disc rotor directly achieved by the individually spaced pillars and columns.

These advantages increase the disc rotor's efficiency by as much as 20% when compared to conventional rotor designs. A 20% increase in disc rotor efficiency directly translates to reduced brake operating temperatures, brake fade, disc rotor stresses, disc thickness variation, run-out and shudder.

All 4000 series rotors also benefit from DBA's "Longlife Slotted" design. The rotors are manufactured to QS-9000 quality standards using premium grade materials with a high iron content and dense metal matrix resulting in long wear and safe, consistent stopping power.

• Unidirectional slotting (left and right) increases pad bite, reduces fade and delivers exceptional braking performance.
• Slots continually de-glaze the brake pads improving efficiency and reducing rotor scoring.
• Slots even out wear across the brake pad faces, increasing the effective contact area and extending rotor life.
• Slots help dissipate water when driving in poor weather, as well as pump away dust and dirt.
• Slotting also combats "out-gassing," where gas (from the pad bonding agents) can form a cushion between pad and rotor, greatly reducing braking power.

DBA rotors are chosen as Original Equipment on many vehicles.

NOTE: BRAKES ARE A SAFETY CRITICAL PART OF A MOTOR VEHICLE.

Brake components should be installed by a competent mechanic in a professional manner. Any incorrect installation of brake components can cause a major safety problem or an accident. If you are not a competent and qualified mechanic you should not attempt to install these products, but should take the vehicle to a vehicle dealer or competent automotive mechanic for their installation.

Disc brake pads and rotors are wear items and as such, should be inspected regularly and replaced as necessary. Read More.