For a wide variety of applications.
SPC Performance's Adjustable Ball Joint's exclusive low profile design makes front camber adjustments possible on many vehicles with upper control arms by replacing the factory ball joint with a sliding ball joint. With an Original Equipment (O.E.) quality replacement ball joint, the SPC Performance Adjustable Ball Joint's sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height.
- Front Adjustment Range: -1.5 degree to +1.5 degree camber
- Installation Time: 0.6 hr. per side
- Kits Required: 1 per wheel
For changes greater than +1.5 degrees, see SPC Performance's Extended Range Ball Joints.
Para una amplia variedad de vehículos.
El diseño de bajo perfil de las rótulas ajustables de SPC Performance, permite ajustar el ángulo camber (comba) en muchos vehículos con brazos de control superiores. Solo se debe reemplazar la rótula original con una rótula deslizante de SPC Performance. Con una rótula de reemplazo con la calidad original (O.E.), este conjunto de platos deslizantes es perfecto para vehículos con alturas que han sido disminuidas para mayor rendimiento o si se desea mantener la altura de fabrica.
- Rango de ajuste frontal: -1.5 grados a + 1.5 grados camber (comba)
- Tiempo de instalación: 0.6 horas por lado
- Juego requerido: 1 por llanta
Para ajustes mayores de + 1.5 grados vea las rótulas Extended Range de SPC Performance.
This product has not yet been reviewed. You can be the first!
Write a Review
