See what we have for your vehicle: 2012 Toyota Camry 4CYL LE (See Products/New Search)
Need help with installation? We have over 7,500 independent Recommended Installers and one that's probably just around the corner from you.

MR107

Machined w/Black Accent
  • FRONT AND REAR
  • Size: 16x7
    (O.E. Diameter)
  • Offset: 45mm
Set of 4: $448.00

Important Note: New TPMS sensors must be initialized at the dealer. This charge is not included in the cost of the sensors. If TPMS sensors are not installed in the wheels, the TPMS warning lights will stay permanently illuminated. An audible chime may also be heard at start-up.

Media Gallery MR107 Machined w/Black Accent
  • On Your Vehicle
  • Video
Product Image

Ratings & Reviews MOTEGI RACING MR107 Machined w/Black Accent

CONSUMER SURVEYS
Based on 3 submissions of our online survey.
  • WHEEL RATINGS
Average Rating:
4.5 out of 5
  • Design Quality Appearance Performance Benefits Proper Fit Ease of Installation Ease of Cleaning
  • 9.0 8.0 10.0 8.0 9.7 10.0 5.0

Note: Consumer Survey Ratings are from 0-10 with 10 being the highest.

  •  Superior (8.6 - 10)
  •  Excellent (6.6 - 8.5)
  •  Good (4.6 - 6.5)
  •  Fair (2.6 - 4.5)
  •  Unacceptable (0 - 2.5)
CONSUMER REVIEWS
    • Vehicle: 2006 Toyota Solara SE SLE V6 Convertible
      Wheel Diameter: 18
      4.4
      • Location:
        UPPER MARLBORO, MD
      August 10, 2015
      Stylish, affordable, and durable
      Was this review helpful? Yes | No
      • Vehicle: 2013 Infiniti G37x Sedan
        Wheel Diameter: Not Provided
        4.4
        • Location:
          null, null
        May 06, 2015
        Just purchased these wheels and had them installed yesterday
        Ordered on Monday and arrived at the installer on TUESDAY!!!
        Only took one day to get here and get installed
        Amazing
        Highly recommend tirerack.com
        The wheels are gorgeous to look at
        The quality seems very good
        Not sure about the cleaning as I only had them on one day so far
        No complaints at all
        Was this review helpful? Yes | No
        • Vehicle: 2010 Chevrolet HHR LS Sport Wagon
          Wheel Diameter: Not Provided
          4.3
          • Location:
            Warner Robins, GA
          12 out of 16 people found the following review helpful:
          September 02, 2011
          I have these rims in the 18x8 configuration on my 2010 HHR LS with a set of Ultra High performance 235/40ZR18 tires. The wider tire these rims allowed me to go with along with the shorter sidewall makes for a superb handling setup. The 235/40-18 tire is the same tire hiegth as the OEM 215/55-16 so your speedometer stays the same without having to do an ECM update for the tire size. The +42mm Offset on these rims also keeps the inner side of the rim in the OEM location and the outer lip still inside the fender well. The CENTER of the rim protrudes approximately 3/4" out from the rest of the rim but still sits even with the exterior body line, but just barely. The inner "lip" where the spokes meet the exterior of the rim is only 3/4" deep. These wheels really make the car look totally different. The small chrome 12 point "bolts" do a fairly good job of keeping the rim looking clean, and if you are looking at the side of the car perpendicular to it a Chrome Valve stem is easily lost in them. The top of the lug nuts are inset about an inch and a half and seem to be on the same plane as the 12 point "bolts". I went with the Chrome Tuner Spline lug nuts that were in stock to get the rims and tires on the car and had planned on ordering some black or black chrome lug nuts, but on installation of the rims you can barely see the lug nuts anyways so I am sticking with the chrome ones because what little you can see still makes for a good clean separation from the rim aesthetically. All in all I am extremely satisfied with these rims for my application. I only rated it an 8 on WHEEL DESIGN/FUNCTIONAL DESIGN because of how deep the lug nuts sit or how far the center of the rim sits out, which ever way you want to look at it. I only rated it a 7 on WHEEL QUALITY/MANUFACTURER CRAFTSMANSHIP because while having no defects in finish it is gravity cast and machined. I rated it an 8 on PERFORMANCE BENEFITS/LEVEL OF IMPROVEMENT IN PERFORMANCE because you can get better made rims.
          Was this review helpful? Yes | No

SERVICE WITH A SMILE

Need help choosing the right products for your vehicle? Our team of highly trained experts has
the knowledge and passion to help. Just pick up the phone and give us a ring.

Or let's chat via email. We love solving problems and lending a hand (or an ear).



Contact Us