• Vehicle: 2003 Nissan 350Z Touring 6-Speed
    Wheel Diameter: Not Provided
    5
    • Location:
      COLUMBUS, OH
    February 28, 2016
    these are the strongest wheels in their price bracket, as well as being one of the lightest, without going forged (at least double the cost). Im running 18x9.5 +15 square, and the wheels weight just under 19lbs each. I've hit huge potholes in a 3500lb car (including me) and no bent rims yet (its bound to happen at the price point and weight these things come in at). The finish was perfect, as well as no casting voids out of the box and they came with black metal valve stems (I didnt want to transfer over my tpms sensors).

    all in all, great if not perfect wheel for the money. i would avoid these wheels if you have a tendency to hit or not swerve for potholes, espically if you are driving a heavier vehicle
    Was this review helpful? Yes | No
  • Vehicle: 2006 Mini Cooper S Built 7/06 And Later
    Wheel Diameter: 16
    4.8
    • Location:
      corpus christi, tx
    9 out of 15 people found the following review helpful:
    September 28, 2012
    This is my story. I bought some cheap rims at a premium price and would never buy without researching again. I used tire rack to pinpoint exactly what i wanted in a rim and tire combo for my car customer service was awesome they know there stuff. I used what i learned and started calling local dealers . Between 7 to 10 day special order and prices that would not even come close to tire rack i decided i got the best deal . sure enough they arrived exactly 3 days later in tact with out a scratch i am a very happy customer as far as the tires and rims i put a 16 inch enkie rpf1 rim black with a potenza 760 sport tire . as soon as i put them on less then a block i knew i made the right choice due to the information i got here. ultra smooth ride with the sporty feel i will never buy from another tire store again awesome job tirerack.
    Was this review helpful? Yes | No
  • Vehicle: 2010 Honda Civic Coupe SI
    Wheel Diameter: Not Provided
    4.2
    • Location:
      Jacksonville, OH
    9 out of 19 people found the following review helpful:
    March 10, 2011
    These wheels are great, for the guy who bent his, remember, these are track related rims, these will be easier to damage,
    Was this review helpful? Yes | No
  • Vehicle: 2005 Honda S2000
    Wheel Diameter: Not Provided
    4
    • Location:
      Torrance , CA
    8 out of 19 people found the following review helpful:
    November 27, 2010
    I had it for about 2 month and one rim is bent already. Other than that, great wheels.
    Was this review helpful? Yes | No
  • Vehicle: 1991 Honda Civic SiR Sedan
    Wheel Diameter: Not Provided
    4
    • Location:
      MEL, AU
    5 out of 7 people found the following review helpful:
    October 05, 2010
    Couldn't be happier with these wheels. These black wheels look great on a white car, so glad I didn't get the silver! I doubt you can get a lighter, better quality wheel for the price, very reasonable.
    Was this review helpful? Yes | No
  • Vehicle: 2005 Honda S2000
    Wheel Diameter: Not Provided
    3.8
    • Location:
      Sumter, SC
    3 out of 6 people found the following review helpful:
    October 19, 2009
    The 17X9 does not fit in a stock s2000 fender.
    Was this review helpful? Yes | No
  • Vehicle: 1992 Nissan 240SX
    Wheel Diameter: Not Provided
    4.2
    • Location:
      Murfreesboro, TN
    0 out of 1 people found the following review helpful:
    October 16, 2009
    I bought the 17x7.5+48 & 17x8+35 wheels from a local retailer. The front wheels weigh in at just over 15lbs, and 15.5lbs for the rears. You can find lighter, but you'll be paying AT LEAST double the price of these Enkei wheels. There is little to dislike about these wheels, but my sole complain comes from the offset for the front wheels. While I understand that this size is more commonly used for FWD cars, it's just irritating since I had to get a custom 15mm spacer just to clear my Wilwood BBK. My suggestion for anyone considering this wheel setup would be to just purchase the 17x8"+35 for the front as well. you'll only need a 5mm spacer if your using coilovers and Z calipers.
    Was this review helpful? Yes | No

SERVICE WITH A SMILE

Need help choosing the right products for your vehicle? Our team of highly trained experts has
the knowledge and passion to help. Just pick up the phone and give us a ring.

Or let's chat via email. We love solving problems and lending a hand (or an ear).



Contact Us